Full Automatic Reciprocating Type Hydraulic Cutting Machine
E-mail: lily@ycmljx.com
  • MACHINE CHARACTERISTICS
  • Technical Parameters

Name

Brand

Intermediate Relay

Idec

Cocontactor

Schneider

Sealing Element

Parker

Solenoid Valve

Northman

PLC

Mitsubishi

Display Screen

Weilun

Cylinder

Mingsheng

Operation switch

Schneider

Main motor

Dedong

NOTE:
If the product market supplies reasons, you can use similar quality brand of products to replace.

Machine performance:

1.Fast intelligent tank type double cylinder and double precision four column automatic balance connecting rod mechanism, ensure the cutting depth of each cutting position accuracy of 0.2mm, automatically adjust block structure, hydraulic control system, ensure the machine cutting speed and precision, all sliding connecting parts adopt center automatic lubrication device, to wear to a minimum.

2.When it is pressed downwards, the cutting head will automatically slow down before it is 10mm away from the cutter so that there is no dimension error between uppermost layer and lowermost layer when cutting materials of multiple layers.

3.The accurate cutting balance can greatly reduce the wearing of die cutter and cutting board. The effect is better during the cutting of the edges and the wearing of the cutting board can be reduced.

4.The conveying part is controlled by mitsubishi PLC of Japan, and the servo motor drives the worktable to move and cut repeatedly to ensure accurate movement and smooth operation. And reciprocating can be conveniently adjusted through the touch screen, fault display information, convenient machine maintenance.

5.The feeding and receiving of the servo motor makes the position alignment precision reach ±0.2mm.

6.The special setting mechanism makes the travel adjustment simple and accurate in conjunction with the die cutter and cutting depth.

7.The central automatic lubricating system ensures machine precision and prolongs service life of the machine.

8.The cutting mould adopted L fixed clamping device,it’s convenient and quick to replace the die cutter .

9.The input and output of materials are controlled by the Cylinder clamping and conveyed on the synchronous belt, cut automatically. It’s safe and Convenient.

10.The equipment can be split in transit.

Type

ABC-600

Max. stroke pressure

60T

Distance between plate and worktable

30-210mm

Effective area of work table

1600*750mm

Motor power

5.5KW

Feeding motor power

1KW

Weight of the whole machine (approx.)

7000Kg

Rated voltage(Customize)

380V/50HZ

Product Catalog